Size Guide & Fit Recommendations

HOW TO MEASURE

These product measurements shall help you decide which size to add to your bag. Use the steps below on how to measure and compare these product measurements and size charts to a similar garment you already own.

HOW TO MEASURE

Blazers and Suit Jackets

SHOULDER WIDTH

Lay the blazer flat surface with the front facing down and make sure its flattened. Place the tape measure across the back to determine the distance between the point of the shoulders (the point of the shoulder is the meeting point between the seam of the shoulders and the armhole).

BACK LENGTH

Lay the blazer on a flat surface with the front facing down and make sure it is properly flattened. Place the tape measure as to determine the distance between the bottom seam of the collar and the bottom of the blazer.

Tailored jackets can be ordered in 'Short', 'Long', and 'Regular' sizes to accommodate men of all different heights. 

Height recommendations; Short 5'4"-5'7" feet, Regular 5'8"-6'2" feet, Long 6'2 1/2"-6'5" feet.

WAIST WIDTH

Lay the blazer on a flat surface on its side fully opened, Place the tape measure from the front edge at the first buttonhole to the back center seam.

HOW TO MEASURE

Trousers, Pants and Shorts

WAIST

Lay the pants flat with buttons fastened. Measure the width of the garment at waistband height from one end to the other and multiple by two. Or measure around the waist as shown in the illustration.

LENGTH

All ready-to-wear trousers come with a finished 34" inch Inseam. All Suits including trousers and trouser separates come with a unfinished 6" inch drop, requiring alteration.

HOW TO MEAUSRE

Woven shirts, Crew Necks, Polos, Sweaters and Outerwear Jackets

A) NECK

Take your tape measure and position it at the base of your neck where the shirt collar would sit.

B) WAIST

Run the tape around the fullest part of the belly. This is usually around the level of the belly button. The measuring tape should be snug on the skin, but not squeezing in.

How to measure

Dress Shirts

Dress shirts are sized according to several key body measurements. Our dress shirts are a tailored fit.

A) NECK

Measure around your neck at the level of your Adam's apple. You should be able to comfortably fit two fingers between your neck and the measuring tape.

B) SLEEVE

Place your hand on your hip, with your arm bent at 90 degrees. Then have someone measure the distance from the center of your back of your neck, along the top of your shoulder and down along your elbow all the way to your wrist.

Size and Fit Guide

Blazers and Suit Jackets

SHOULDER WIDTH

Lay the blazer flat surface with the front facing down and make sure its flattened. Place the tape measure across the back to determine the distance between the point of the shoulders (the point of the shoulder is the meeting point between the seam of the shoulders and the armhole).

BACK LENGTH

Lay the blazer on a flat surface with the front facing down and make sure it is properly flattened. Place the tape measure as to determine the distance between the bottom seam of the collar and the bottom of the blazer.

Tailored jackets can be ordered in 'Short', 'Long', and 'Regular' sizes to accommodate men of all different heights. 

Height recommendations; Short 5'4"-5'7" feet, Regular 5'8"-6'2" feet, Long 6'2 1/2"-6'5" feet.

WAIST WIDTH

Lay the blazer on a flat surface on its side fully opened, Place the tape measure from the front edge at the first buttonhole to the back center seam.

US SIZE FIT CHEST (inches) HEIGHT (feet)
36S Short 36-37 5'4"-5'7"
36R Regular 36-37 5'8"-6'2"
38S Short 37-39 5'4"-5'7"
38R Regular 37-39 5'8"-6'2"
40S Short 40-42 5'4"-5'7"
40R Regular 40-42 5'8"-6'2"
40L Long 40-42 6'2 1/2"-6'5"
42S Short 42-43 5'4"-5'7"
42R Regular 42-43 5'8"-6'2"
42L Long 42-43 6'2 1/2"-6'5"
44S Short 44-45 5'4"-5'7"
44R Regular 44-45 5'8"-6'2"
44L Long 44-45 6'2 1/2"-6'5"
46S Short 46-48 5'4"-5'7"
46R Regular 46-48 5'8"-6'2"
46L Long 46-48 6'2 1/2"-6'5"
48S Short 46-48 5'4"-5'7"
48R Regular 48-49 5'8"-6'2"
48L Long 48-49 6'2 1/2"-6'5"

 

 FIT TYPE BLAZER / SUIT MODEL NAME FIT DESCRIPTION
Modern Fit Esprit / Engel / Ernest / Essence / Edison / Elon / Elwood / Erie / Ethan / Concord Higher armhole, comfortable fit in chest and shoulders. Slightly tapered waistline.
Contemporary Fit Darwin / David / Dean / Hampton / Hartford / Hill / Quinn / Queens / Irving / Midland / Mortan / Marcus / Myles / Marco / Montana / Morgan / Madison / McAllen Slightly shorter jacket length. Contemporary trim fit.

Trousers, Pants and Shorts

All ready-to-wear trousers come with a finished 34" inch Inseam. All Suits including trousers and trouser separates come with a unfinished 6" inch drop, requiring alteration. 

US SIZE WAIST (in's)
30R 30
32R 32
33R 33
34R 34
35R 35
36R 36
38R 38
40R 40

 

Sport shirts, Crew Necks, Polos, Sweaters and Outerwear Jackets

INTERNATIONAL SIZE US SIZE WAIST (in's) NECK (in's)
XS 36 30-31 13.5"-14.5"
S 38 32-33 14.5"-15.5"
M 40 34-35 15.5"-15.5"
L 42 36-37 15.5"-16"
XL 44 38-39 16"-17"
XXL 46 40-42 17"-18"
XXXL 48 43-45 18"-19"

 

Dress Shirts

NECK SIZE NECK (in's) SLEEVE (in's)
15 15"-15.5" 34.5-35
15.5 15.5"-16" 35-35.5
16 16"-16.5" 35.5-36
16.5 16.5"-17" 36-36.5
17 17"-17.5" 36.5-37
17.5 17.5"-18" 37-37.5
18 18"-18.5" 37.5-38